Door guides

How to check room for furniture through a doorway

The door opening may be only one tight point. Trace the route from the first entrance to the place where the item will go.

Measure the route as used

Open the door as far as it will normally go and find the closest points across the usable passage. Measure between the objects that actually limit it, which might include the open door, handle, stop or nearby furniture. Note how far the door can move and what limits it. Record the size of any stairs, corner or landing immediately beyond the door.

Measure the item or use the maker's packaged dimensions if it will arrive boxed. Note handles, feet or other parts that project. Compare the full route and account for turning, not just straight-line width.

  • Mark the narrowest point on a sketch.
  • Keep item dimensions and doorway measurements separate.
  • Note if you measured the packaged item or the unboxed item.

Explain what the project needs to change

Tell the contractor if the issue comes up once or will matter every time equipment passes. Ask whether changing the doorway would address the route as a whole. If a turn or stair remains the tightest point, discuss that before assuming a wider opening is enough.

Tell me about the door

A short note about what is happening and where the door is gives me a place to start.

Leave me a note