Door repair and replacement guides
A place to start if a door sticks, lets in a draft, or has reached the point where you want to replace it.
Door problems
Use what you can see or hear to describe the problem with the door.
- How to Find Where a Door Rubs
Find the exact rub mark and note when the drag starts so a contractor can check the door, frame and flooring.
- Why a Door Might Bind in Damp Weather
Track when a door binds, where it touches and whether nearby finishes or the sill show signs of moisture.
- Signs a Door Hinge Might Be Loose
Observe hinge movement and uneven gaps during ordinary use, then show a contractor the exact hinge and part of the frame involved.
- When a Door Latch Misses the Strike
Check how the latch meets the strike during normal closing and show the contractor where it contacts or fails to catch.
- A Door Lock Works Open but Sticks Closed
Compare normal key or thumb-turn movement with the door open and closed, and record what changed around the door or frame.
- Track Down a Draft Around an Exterior Door
Work out whether moving air is coming from the threshold, vertical seal, top edge or surrounding trim before requesting a repair.
- Is the Weatherstrip Around Your Door Worn?
Look for hardened, torn or compressed weatherstrip and tell a contractor where the seal loses contact with the door.
- When a Door Sweep Scrapes or Lets Air Through
Check whether the bottom sweep touches the threshold evenly, catches on flooring or has a worn section away from the sill.
- What to Record When Water Appears at a Door Sill
Record when water shows up at an exterior door, where it appears first and what the outside landing looked like at the time.
- What to Note About a Soft or Damaged Door Jamb
Show a contractor visible jamb changes such as peeling paint, dark staining or crumbling edges, and describe nearby wet conditions.
- What to Tell a Contractor About Cracked Door Glass
Describe cracked door glass from a safe position and identify the panel, visible crack pattern and any change to normal access.
- Where a Sliding Patio Door Starts to Bind
Locate the part of a patio slider's travel where it drags and record track, latch and panel observations for a contractor.
- Where That Door Squeak Is Coming From
Pinpoint whether a squeak starts at a hinge, the floor or the frame and record the part of the door's swing where you hear it.
- What to Note When a Door Closer Slams or Stalls
Observe which part of an assisted door's closing cycle changes, and give a contractor the closer model and surrounding conditions.
- Why a Door Swings Open or Shut on Its Own
Watch which way a door drifts, when it moves and what nearby conditions change so a contractor can check the frame and hardware.
- A Loose Door Handle: Which Part Is Moving?
Identify whether a lever, trim plate or latch is moving during use, and record whether the door still closes and opens normally.
- Check a Loose or Damaged Door Threshold
Show where a door threshold moves, cracks or becomes a trip concern, and record how it meets the sweep and flooring.
- What to Look For After a Door Frame Takes a Hit
Describe visible changes to a struck door and its frame, and tell the contractor if the opening still closes, locks and stays in place.
- Is the Fog on the Door Glass or Between the Panes?
Locate moisture or haze on accessible surfaces and note when it changes before asking a contractor to inspect a glazed door.
- A Screen Door Sags, Drags or Tears at the Edge
Work out whether a screen issue is at the mesh, frame, track or latch and tell a contractor how the screen moves separately.
- What to Notice When a Door Rattles in the Wind
Pinpoint the part of a doorway making noise in gusts and record the door, latch and seals in their normal resting positions.
- When a Door Starts Sticking After Painting
Check which recently painted surfaces touch or transfer before asking a contractor to assess a door that sticks after finishing.
- When a Storm Door Catches the Main Door Handle
Locate where a storm door contacts the entry door or hardware, and show a contractor how the two door swings overlap.
Planning a change
Think through the opening, the parts you want to keep and who needs access before work starts.
- How to plan a door replacement
Decide what you want a replacement door to change before you ask someone to assess the opening.
- What to do before a door site visit
Gather doorway details and clear a route so a contractor can see what the job involves on the first visit.
- Which photos help plan a door project?
Photograph the whole doorway, nearby obstacles and finishes you want to keep so a contractor can understand the job.
- How to write a door project note
Describe the opening, the change you want and the details a contractor needs before arranging a conversation.
- Can I keep my existing door casing?
Document the trim you want to keep and ask how replacing a door may affect the casing and surrounding finishes.
- How to plan door work around older trim
Preserve the details of older door trim in your project notes and agree what should happen if a piece cannot be reused.
- How to plan a door project in a shared hallway
Coordinate hallway access, circulation and communication for door work that affects other residents or building users.
- How to plan a quieter bedroom door
Describe when bedroom noise is a problem and what the contractor should assess around the door and frame.
- How to plan bathroom door privacy
Balance privacy, everyday access and the room layout when planning a bathroom door change.
- When should a new door be finished?
Agree when painting or finishing will happen and who will handle each surface and the final touch-ups.
- How to match an existing door finish
Gather useful samples and photos before trying to match a replacement door to existing paint, woodwork or trim.
- How to plan a door threshold change
Show the current floor transition and agree which surfaces and clearances matter before changing a threshold.
- How to plan a door for a busy entrance
Plan around deliveries, bags, household traffic and daily use before changing the way your main entry works.
- How to check room for furniture through a doorway
Measure the whole route for furniture or appliances before expecting a door change to improve passage.
- How to set the scope for a door replacement
Separate the door, frame, hardware and finish work so everyone can see what a replacement estimate covers.
- How to compare door installation estimates
Compare two door installation estimates using the same scope, materials, finish work and assumptions.
- How to schedule a door job with new flooring
Coordinate a door change with flooring work so the final levels, thresholds and trim decisions are known in time.
- How to schedule a door job in an occupied home
Plan the workday around access, quiet periods, children, pets and other needs while people are living in the house.
- How to plan a closet door change
Start with what you need to reach in the closet and how much room there is in front of it.
- How to plan a laundry room door change
Check the approach, appliance clearance and daily use before changing a laundry room doorway.
- How to plan a home office door
Describe privacy, noise and everyday access needs before asking a contractor to change a home office door.
- How to plan a door next to a stair landing
Show the stair, landing and other doors so a contractor can assess the doorway's everyday use and work access.
- How to plan a door project in stages
Split a multi-door project into useful stages without losing decisions about finishes, hardware and access.
Tell me about the door
A short note about what is happening and where the door is gives me a place to start.