Door guides

When a Door Starts Sticking After Painting

A sticking point after painting can leave a raised ridge or a fresh transfer mark. Record which surfaces meet and how long ago they were painted.

Look at the painted contact area

Observe the first place the door starts to resist under its normal motion. Look at the matching areas on the door edge, frame and stops. Fresh paint can show a dent, a transfer mark or a glossy contact line. Notice if the sticking starts when the door begins to open after sitting closed, or if it rubs while it moves through the last part of the swing. Take photos with the door at rest and avoid peeling or scraping the finish to see what is underneath.

Give the finishing and use history

Write down when the door was coated, which sides and edges were painted and what product was used if you know it. Note whether trim, hinges or weatherstrip were also changed during the work. Tell the contractor if the fit was already tight, whether the latch still catches and if the problem changes with the weather. When possible, get a picture of both contacting surfaces. That gives them the start of a fit and finish assessment before they suggest a next step.

Tell me about the door

A short note about what is happening and where the door is gives me a place to start.

Leave me a note