Door guides

How to Find Where a Door Rubs

A drag halfway through the swing points to a different place than a scrape just as the door closes. Locate the first contact before describing the symptom.

Watch the first contact

Move the door slowly through its normal swing. Stop when you first feel resistance and look at the top, latch edge and floor from a clear position. Keep fingers away from the gap as the door moves. Look for a shiny scrape, paint transfer or a clean stripe in the dust. If the floor has a rub mark, compare its length with the arc of the door. A short mark near the closed position gives the contractor a different lead from one across the room.

Send a close photo and the view of the whole frame

Mark the contact point on a photo with an arrow. Take a second picture of the door resting as close to shut as it normally gets. Note if it closes and latches without pulling or lifting it. Report a recent floor covering, painted edge or furniture move that changed where you notice the drag. If the problem happens after rain or during a stretch of humid weather, give the dates or conditions you remember. Those details help narrow the first checks.

Tell me about the door

A short note about what is happening and where the door is gives me a place to start.

Leave me a note