Door guides

What to Note About a Soft or Damaged Door Jamb

Start with what you can see from outside the material. Discolouration, peeling finish and moving fastenings can help a contractor decide where to inspect.

Record visible changes without opening the trim

Look at the frame near the sill and where it meets the surrounding trim. Photograph peeling paint, dark marks, cracking and any crumbled surface that is already visible. Compare each side of the door and note whether there is also a gap where two pieces meet. If a hinge or strike looks loose around the damaged part, leave it as it is and describe the movement you already noticed in normal use. Avoid pushing into the jamb or pulling off material to see how far it goes.

Show how the damage relates to water and closing

Include a wider photo of the whole entrance and tell the contractor whether the area stays damp after rain. Mention if you have seen water at floor level indoors, recent exterior painting or any change in the way the door closes. Say roughly how long the mark has been there and whether it has grown. If the door and lock still work, record that too. This leaves the contractor with specific points to inspect around the frame and sill.

Tell me about the door

A short note about what is happening and where the door is gives me a place to start.

Leave me a note